Showing all 9 results

$2 Crimphead (Canadian)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.

Dime Crimphead (US and Canadian)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.

Dollar Crimphead (US and Canadian)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.

Half Dollar Crimphead (US)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.

Klopp Model CR1 Coin Crimper Machine

$375.00

Features

  • Crimps ends of each wrapper in around 2 seconds
  • Crimps shotgun shell wrappers or flat style wrappers
  • Over seven different crimping heads available
  • Uses a 1/30 hp motor, 115 volt, 60 cycle power
  • Crimper head storage rack comes when ordered with more than one head
  • Made in USA

Klopp Model CR4 Coin Crimper Machine

$575.00

Features

  • Crimps ends of each wrapper in around 2 seconds
  • Crimps shotgun shell wrappers or flat style wrappers
  • Over seven different crimping heads available
  • Uses a 1/30 hp motor, 115 volt, 60 cycle power
  • Crimper head storage rack comes when ordered with more than one head
  • Made in USA

Nickel Crimphead (US and Canadian)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.

Penny Crimphead (US and Canadian)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.

Quarter Crimphead (US and Canadian)

$50.00

Features

  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled seal has been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.